DH-100-3W Bathroom Soap Dispensers
The trio bathroom soap dispenser is refillable wall mounted soap dispensers for lotion, liquid soap dispenser, shampoos & Conditioners soap dispensers.
The Trio bathroom soap dispensers ensure as fine design and clear functionality eliminates shower soap bottles clutter.
Make your bathroom, kitchen complete!
The trio bathroom soap dispenser perfect fit to any public toilet, gym shower room and School.
The trio bathroom soap dispenser have level indicator windows. Easily snap open lid stays open for soap chamber access.
These trio bathroom soap dispenser can be mounted easily, The trio soap dispensers available in white and chrome and variety color coating.
You can fix the trio bathroom soap dispensers to the surface of tiles, marble, glass-fiber, plastic, glass or acrylic with silicone supplied or Fastening with screws.
Installation Instructions
Adhesive-mounted installation
- Clean and dry the wall or tile surface thoroughly to assure lasting adhesion.
- Tear off the backing of the adhesive tapes. Apply tapes to the raised surface on the back of the dispenser.
- Apply silicon evenly on the remaining raised surface on the back of the dispenser.
- Press the dispenser firmly against the wall in preferred location for 2-3 minutes.
- Allow silicon bond to cure for 24 hours prior to filling bottles with lotion.
Screw-Mounted installation
- Select mounting position using the back plate as a guide.
- Mark drilling points with a pencil through the pre-drilled holes.
- Drill mounting holes using a 1/4’’ diameter drill bit
- Hammer anchors into holes avoiding wall tile with hammer as it may crack
- Tighten screws through back plate
- Fill your dispenser chamber and it is ready to use.
Key-Lock to refill dispenser
- Take plastic cap and put into the right low side round hole of the soap dispenser. The arrow of the cap → aimed at the arrow of the dispenser →
- Insert plastic key into round hold of the dispenser.
- Turn key clockwise/ counter clockwise to lock/unlock.
Soap Dispensers Bathroom
| Item Number: DH-100-3W | Classic 100 series , Material in Plastic ABS in White |
|---|---|
| Product Size: | Product Size: |
| 267mmX196mmX85mm; Product Weight: 540g Capacity: 350ml x 3 chambers; 0.71ml each dispense |
1 pc in a retail box. 12pcs in a master carton Package weight: 752g N.W.: 10.4kgs;G.W.:11.4kgs;3.1’cuft; 0.0877CBM. |