Bathroom Soap Dispensers DH-100-4CP
The Bath Soap Dispensers 4 chambers is refillable wall mounted soap dispensers for lotion, liquid soap dispenser, shampoos & Conditioners soap dispensers.
The bath soap dispensers 4 chambers ensure as fine design and clear functionality eliminates shower soap bottles clutter.
Make your bathroom, kitchen complete!
The bath soap dispensers 4 chambers perfect fit to any public toilet, gym shower room and School.
The bath soap dispensers 4 chambers have level indicator windows.
Easily snap open lid stays open for soap chamber access.
The bath soap dispensers 4 chambers can be mounted easily,
The bath soap dispensers 4 chambers available in white and chrome and variety color coating.
You can fix the bath soap dispensers 4 chambers to the surface of tiles, marble, glass-fiber, plastic, glass or acrylic with silicone supplied or Fastening with screws.
Installation Instructions
Adhesive-mounted installation
- Clean and dry the wall or tile surface thoroughly to assure lasting adhesion.
- Tear off the backing of the adhesive tapes. Apply tapes to the raised surface on the back of the dispenser.
- Apply silicon evenly on the remaining raised surface on the back of the dispenser.
- Press the dispenser firmly against the wall in preferred location for 2-3 minutes.
- Allow silicon bond to cure for 24 hours prior to filling bottles with lotion.
Screw-Mounted installation
- Select mounting position using the back plate as a guide.
- Mark drilling points with a pencil through the pre-drilled holes.
- Drill mounting holes using a 1/4’’ diameter drill bit
- Hammer anchors into holes avoiding wall tile with hammer as it may crack
- Tighten screws through back plate
- Fill your dispenser chamber and it is ready to use.
Key-Lock to refill dispenser
- Take plastic cap and put into the right low side round hole of the soap dispenser. The arrow of the cap → aimed at the arrow of the dispenser →
- Insert plastic key into round hold of the dispenser.
- Turn key clockwise/ counter clockwise to lock/unlock
| Item Number: DH-100-4CP | Classic 100 series , Material in Plastic ABS in Chrome |
|---|---|
| Product Size: | Product Size: |
| 267mmX255mmX85mm Product Weight: 750g Capacity: 350ml x 4 chambers; 0.71ml each dispense |
1 pc in a retail box. 12pcs in a master carton Package weight: 982g N.W.: 11.8kgs;G.W.:12.8kgs;4’cuft; 0.1132CBM. |